3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
matt.haines38
09-09 18:39
Model Name
3671e334-a6cf-4eb0-b98f-83402935b816
Tags
3d printing
3d printing realistic
inlet
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
Input
Prompt
“A cylindrical outer shell for a dairy teat-scrubbing wand, 50 mm OD and ~80 mm long. One end rounded/closed, the other open. Inside, create a smooth-bore central cavity with a shallow locating step to accept a removable turbine module (the module contains shaft and bushes). Add a side water inlet and a side outlet positioned around the cavity; from the outlet, route an internal channel to a snap-fit groove around the inner rim at the open end for a removable spray ring. Integrate a waste-water system: add an internal annular gutter/sump beneath the turbine cavity and teat chamber that collects run-off and connects to a bottom vacuum fitting (downward boss with through-hole) on the underside of the shell. Keep the clean-water feed to the spray ring isolated from the drain. Exterior smooth, ~3 mm walls, printable plastic, no decorative details.”
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
matt.haines38
matt.haines38matt.haines38