3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777316353
04-28 11:27
Model Name
electronic enclosure 3d model
Tags
3d printing
3d printing realistic
electronic
electronic enclosure
enclosure
hollow interior
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
A detailed 3D model of a compact electronic enclosure with an empty internal layout for flexible DIY assembly. Dimensions: 120 mm width, 80 mm height, 55 mm depth, wall thickness 3 mm. Material: Matte black ABS plastic, fine texture, rounded corners (6 mm radius), 1 mm chamfer edges. Front Panel: Two display cutouts: Top: 47 x 24 mm, centered, 10 mm from top. Bottom: 28 x 31.5 mm, centered, 10 mm below top display. Four corner screw holes, 3 mm diameter, 6 mm from edges. Back Panel: USB Type-C port: 9 x 4 mm, centered, 12 mm from bottom. Three button holes: 6 mm diameter, aligned horizontally, centered, 10 mm spacing, 12 mm above port. Battery door: 60 x 40 mm, centered, recessed. Ventilation holes: 2 mm grid on both sides. Four screw holes aligned with front panel. Internal: Completely hollow interior, flat base, no fixed mounts. Includes only 4 corner screw posts (6 mm height, 3 mm holes) and minimal support ribs. Optional 2 mm pilot hole grid with 10 mm spacing for flexible mou
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777316353
Anonymous1777316353