3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
crazyterror6516
11-09 18:52
Model Name
tactical pouch 3d model
Tags
pouch
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
tactical pouch
Prompt
A large tactical field pouch — clean, professional, factory-quality design in solid dark olive green. Dimensions: external 260 × 160 × 120 mm (L × H × D). Materials: 500D Cordura nylon shell, 210D nylon lining, foam-backed front panel for shape retention. Colour: dark olive green (#394B2B HEX) with slightly darker reinforcement panels (#2F3C24). Hardware: YKK #10 heavy-duty coil zipper with dual sliders and fabric storm flap; ITW Nexus Duraflex 25 mm side release buckle for removable flap strap; 25 mm PALS/MOLLE webbing on rear (two vertical straps with snap closures) for secure mounting. Closure: top flap with hook-and-loop (Velcro) patch (75 × 30 mm) under the flap plus optional buckle strap for positive lock. Drainage: one 6 mm brass-lined drainage grommet in the bottom. Stitching: 5–6 mm seam allowance, 3-stitch bartack reinforcement at stress points, 6-thread double-stitch main seams with bonded nylon thread (size Tex70). Internal organization: removable padded divider (180 × 120 mm), two elastic retention bands (12 mm elastic) sewn horizontally for small tools, a zippered internal pocket (200 × 110 mm) in the back wall for documents, and a thin mesh pocket (open top) on the inner face of the flap. Capacity: ~5 liters. Weight (empty): ≈ 260–320 g depending on hardware. Shape: rectangular with lightly rounded corners, slightly tapered height so front is 5 mm lower than back to improve fit when mounted. Edges: all raw edges hemmed with nylon bias tape. Finish: factory-clean, no wear, even dye, matte water-resistant finish (DWR coating). Include small external ID/patch field (hook surface 100 × 40 mm) on the flap front. Provide production notes: pattern pieces, seam allowances, and suggested stitch lengths (3.5–4 mm). Tags: #tactical_pouch #dark_olive #500D_Cordura #molle_compatible #field_pouch #clean_factory #zipper_flap #5l_capacity #velcro_id_patch Technical spec sheet (metrics + inches) External overall (target): 260 mm (L) × 160 mm (H) × 120 mm (D) Inches: 10.24″ × 6.30″ × 4.72″ Internal usable volume: ~4.5–5.0 L Opening (flap) width: 240 mm (9.45″) Flap drop (from top hinge): 70 mm (2.76″) — covers zipper + storm flap PALS/MOLLE vertical spacing: standard 25 mm (1.0″) webbing pitch; rear mounting panel length 140 mm (5.5″) Drain hole diameter: 6 mm (0.24″) Materials & hardware (recommended exact specs) Shell: 500D Cordura® nylon, plain weave, DWR finish, colour HEX #394B2B (dark olive) Reinforcement panels: same 500D but in #2F3C24 for subtle contrast (optional) Lining: 210D nylon taffeta (light olive) Foam: closed-cell polyethylene foam 3–5 mm for front/back stiffening Zipper: YKK #10 coil — heavy duty, black; two sliders with fabric pulls Buckle: ITW Nexus Duraflex 25 mm side-release (matte black) Hook & Loop: 75 × 30 mm loop patch under flap + external ID loop 100 × 40 mm Thread: bonded nylon, Tex70 (or polyester 40/3 triple-twist) Grommet: brass or nickel plated, 6 mm hole Elastic: 12 mm flat elastic (black) for internal retention bands Bias tape: 20 mm nylon bias for edge binding (matching colour) Construction details & pattern pieces Provide the following pattern pieces (with seam allowances of 5–6 mm included): Main body (single panel) — cut to wrap around with rear overlap: 1 piece 760 × 130 mm (to fold into L×H×D shape). Front panel — 260 × 160 mm (outer face) + 3–5 mm foam backing. Bottom panel — 260 × 120 mm with grommet placement 40 mm from rear edge centered laterally. Side panels (2) — each 120 × 160 mm. Flap — 260 × 90 mm outer + 210D lining + internal mesh pocket sewn to inner face (200 × 80 mm mesh). Include 75 × 30 mm Velcro placement centered 40 mm from flap edge. Add 20 mm overlap for buckle strap. Rear MOLLE panel — 140 × 120 mm with two 25 mm vertical webbing straps sewn, ends finished with snaps. Internal divider — 180 × 120 mm with 3 mm foam, removable via Velcro strip at top. Internal zip pocket — back wall panel, zipper length 200 mm. Stitching & reinforcement: Double-fold hem on all openings. Bartack at each corner of flap, at base of webbing, and at both ends of PALS straps (minimum 3x bartacks). Zipper seam reinforced with topstitch ±3.5 mm from zipper edge. Use 3-stitch chain or triple-stitch on high-stress seams if machine supports. Aesthetic & finish Colour uniformity: factory dye — no fading gradient. Surface finish: matte with DWR (drops bead). Labeling: small inside tag with material and washing instructions (wash cold, line dry). No extra decorative patches; only external hook field for ID. Corners: slightly rounded radius 8–12 mm for a soft, robust look. 3D / modeling notes (if you want to generate a model) Model scale: use external dimensions above. Meshes: separate objects: pouch_shell, flap, zipper, molle_panel, internal_divider, grommet, buckle_strap. Surface detail: normal map for 500D texture; subtle fabric weave (scale 2–3 mm per thread visible in close-up). UVs: unfold each panel flat — no overlapping for exterior shell. Materials: base color hex #394B2B, roughness ~0.6, microsurface for Cordura; metal grommet specular 0.85. Polycount: keep low for game: 3–6k tris; high-res hero: 40–80k with fabric microfold normal maps. Quick manufacturing notes & tolerances Tolerance: ±3 mm on cut pieces, sewing tolerance ±2 mm. Allow 5 mm seam allowance by default, increase to 10 mm where reinforcement is needed (rear MOLLE attachment). Recommended QC check: zipper smoothness (10 open/close cycles), buckle stress test (10 kg pull), water bead test for DWR.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
crazyterror6516
crazyterror6516crazyterror6516