fidget clicker 3d model

“A low‑profile, Cherry MX‑compatible fidget clicker consisting of two snap‑fit parts: 1️⃣ Housing – a rectangular block 18 mm × 12 mm × 8 mm with an internal cylindrical recess on the top face: Ø 3.2 mm, depth 2.2 mm, entry edge chamfered 45° (0.2 mm) to avoid internal overhang. 2️⃣ Keycap – a flat‑top square 12 mm × 12 mm × 4 mm with a centered cylindrical stem Ø 3.0 mm, height 2.0 mm that inserts into the housing recess. The stem tip may have a 0.1 mm fillet for easier insertion. Both parts have smooth surfaces, wall thickness ≥ 1.2 mm, no protruding features, and are designed to print without supports on a 0.4 mm nozzle using Hyper PLA. Show the assembled clicker from a slight isometric angle, matte PLA finish, soft studio lighting, and a subtle drop‑shadow to emphasize the snap‑fit joint.”