3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768643328
01-17 19:52
Model Name
cylindrical planter 3d model
Tags
3d printing
3d printing realistic
planter
props
props 3d printing
props 3d printing realistic
props realistic
realistic
solid cylindrical
Prompt
A modern cylindrical planter with a two-zone exterior design, intended for 3D printing as a single solid object (with optional drainage hole). Overall shape The planter is a vertically oriented cylinder with a flat bottom and an open top. Overall height is approximately equal to or slightly greater than the diameter (roughly 1:1 to 1.1:1 height-to-diameter ratio). Outer silhouette is clean and symmetrical around the vertical axis. Lower section (base) The bottom ~35–40% of the total height is a smooth, solid cylindrical band. This section has no texture or pattern, just a clean matte surface. The transition between bottom and top sections is horizontal and clearly defined (a sharp edge or very slight fillet). Bottom surface is flat and suitable for standing on a surface. Optional centered drainage hole can be included (cylindrical, straight through). Upper section (textured band) The upper ~60–65% of the planter features a raised diamond lattice / crisscross pattern. The pattern consists of diagonal intersecting ribs, forming evenly spaced diamond shapes around the circumference. Ribs are raised outward from the base cylinder (embossed, not cut inward). Diamond pattern wraps seamlessly around the entire circumference. Rib thickness is consistent; intersections are smooth and slightly rounded (not sharp). Pattern depth is moderate (suitable for FDM printing without supports). Top rim The top opening is circular. The rim is slightly thickened compared to the wall, with a subtle rounded edge or chamfer for strength. Interior wall is smooth (no lattice inside). The inner cavity is cylindrical and straight down. Interior Interior walls are smooth and vertical. Wall thickness is uniform throughout (suitable for printing, e.g. 2.5–4 mm depending on scale). Interior depth matches exterior height minus base thickness. Edges & fillets Bottom outer edge has a small fillet or chamfer to avoid sharp edges. Transition between smooth lower band and lattice upper band may have a minimal fillet or crisp edge depending on design preference. Style & intent Minimalist, modern, architectural design. Intended to be printed as a single solid part without supports. No logos, text, or decorative elements beyond the lattice texture.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768643328
Anonymous1768643328