3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1779933598
05-28 02:06
Model Name
clip-on wearable device 3d model
Tags
machine
rendering
realistic
Prompt
A sleek, rectangular clip-on wearable device approximately 7 cm tall × 3.5 cm wide × 1.5 cm deep. The enclosure is matte black ABS plastic with softly rounded corners and a micro-dot soft-touch grip zone on the lower third of the front face. On the front face from top to bottom: a small circular LED indicator recess near the top, a narrow perforated grille panel in the upper-center area, a subtly raised rectangular module cover in the middle, and a large recessed circular button housing in the lower half. A USB-C port opening is cut into the bottom edge. The back features a full-height spring-loaded steel clip mounted flush to the rear shell. Internally, the upper cavity holds the main PCB, the mid zone houses the GPS and microphone modules side by side, and the lower zone contains the buzzer and button mechanism with a flat battery slab at the base. Studio lighting, white background, premium consumer electronics aesthetic.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
