magnet pocket dish 3d model

A small rectangular shallow dish, 20mm wide x 20mm deep x 15mm tall. The dish has ONE VERTICAL SIDE WALL that is completely flat - this is the back mounting wall. On this flat vertical back wall, there are TWO circular recessed pockets positioned side by side horizontally to hold 3/8 inch (9.5mm) diameter x 3/32 inch (2.4mm) thick neodymium magnets, with 2mm spacing between the magnet pockets. The magnet pockets are recessed into the OUTSIDE surface of the vertical back wall, accessible from behind, NOT from inside the dish. The dish interior is smooth and watertight. The bottom of the dish is solid and sealed to hold liquid. The three remaining walls (left, right, front) have gently curved interior surfaces. All walls are 2mm thick. The vertical back wall with magnet pockets attaches flush against glass or plexiglass. Simple functional geometric design, optimized for 3D printing. Empty dish with no objects inside.