3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
ritchhiley
02-15 22:48
Model Name
magnetic dish 3d model
Tags
2mm
3d printing
3d printing realistic
5mm diameter
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
A small rectangular shallow dish, 20mm wide x 20mm deep x 15mm tall. The dish has ONE VERTICAL SIDE WALL that is completely flat - this is the back mounting wall. On this flat vertical back wall, there are TWO circular recessed pockets positioned side by side horizontally facing outwards to hold 3/8 inch (9.5mm) diameter x 3/32 inch (2.4mm) thick neodymium magnets, with 2mm spacing between the magnet pockets. The magnet pockets are recessed into the OUTSIDE surface of the vertical back wall, accessible from behind, NOT from inside the dish. The dish interior is smooth and watertight. The bottom of the dish is solid and sealed to hold liquid. The three remaining walls (left, right, front) have gently curved interior surfaces. All walls are 2mm thick. The vertical back wall with magnet pockets attaches flush against glass or plexiglass. Simple functional geometric design, optimized for 3D printing. Empty dish with no objects inside.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
ritchhiley
ritchhileyritchhiley