3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1775023582
06-07 14:43
Model Name
injection mold 3d model
Tags
machine
3d printing
realistic
Prompt
A two-part split injection mold for a children's toy-style syringe outer cover. Show the mold in exploded view with top half floating above bottom half, separated at the parting line. Top half (cope): Gray aluminum block 280mm long, 80mm wide, 60mm tall. Flat parting face on the bottom. Inner cavity face has an upward half-cylindrical groove 168mm long, 48mm diameter, with a rounded dome at the left end for the tip cap and a larger circular recess at the right end for the plunger flange. A rectangular slot 170mm × 24mm cut into the groove top for the window insert. One funnel fill port on the top center. Two small vent holes near each end. Two steel alignment pins protruding from the parting face. Bottom half (drag): Same block dimensions. Flat parting face on top. Mirror image cavity groove facing downward. Two alignment pin holes matching the cope pins. Four corner bolt holes on both halves. Accessories shown nearby: One rectangular yellow wax rod insert 170mm × 24mm × 10mm. Four M6
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1775023582
Anonymous1775023582