3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773320495
03-17 15:38
Model Name
monitor arm 3d model
Tags
3d printing
3d printing realistic
design
monitor
monitor arm
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Act as a professional mechanical design engineer specialized in 3D printable structural parts. I will provide an STL file of a monitor stand (Samsung BX2450 stand). Your task is to modify and redesign it while preserving its original geometry where specified. OBJECTIVE: Redesign the support to be wall-mounted with a VESA-compatible plate, maintaining structural integrity and printability. INPUT: - Existing STL: monitor stand arm - Maintain original arm geometry, angle, and length MODIFICATIONS REQUIRED: 1. REMOVE BASE: - بالكامل remove the original base of the stand - Keep only the arm structure 2. VESA MOUNT PLATE: - Add a flat mounting plate at the end of the arm - Plate must support: - VESA 75x75 mm - VESA 100x100 mm - Hole diameter: 5 mm (compatible with M4/M5 screws) - Plate thickness: 6–8 mm 3. WALL MOUNT BASE: - Create a new wall-mount plate at the opposite end - Orientation: perfectly perpendicular to the wall (vertical plane) - Dimensions: approx. 80–120 mm wide - Thickness: 8–10 mm - Include 4 mounting holes (Ø 6–8 mm) for wall anchors 4. STRUCTURAL REINFORCEMENT: - Reinforce the junction between arm and wall plate - Add triangular ribs on both sides - Add fillets (minimum radius 5 mm) to reduce stress concentration - Design must تحمل bending moment from monitor وزن 5. HOLLOW STRUCTURE: - Convert the arm into a hollow structure - Wall thickness: 3–4 mm - Include internal ribs or support structure to maintain rigidity - Avoid sharp internal corners 6. ANGLE PRESERVATION: - Maintain the original inclination angle of the arm exactly as in the STL - Do not alter ergonomic orientation 7. PRINTABILITY (CRITICAL): - Optimize for FDM 3D printing (Ender 3 V3 SE) - Avoid आवश्यकता excessive supports - Ensure overhangs are ≤ 45° where possible - Design for horizontal printing orientation (best strength direction) 8. OUTPUT: - Export as clean, watertight STL - No non-manifold geometry - No mesh errors 9. MATERIAL ASSUMPTION: - Optimized for PLA or PETG - Must safely support 3–5 kg monitor weight DESIGN PRIORITIES: - Structural strength > aesthetics - Smooth stress transitions - Practical manufacturability OPTIONAL: - Add cable routing hole through arm (10–15 mm diameter)
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773320495
Anonymous1773320495