3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1778932675
05-16 12:02
Model Name
pneumatic wing 3d model
Tags
machine
3d printing
realistic
Prompt
Act as an expert Aerospace Engineer and OpenSCAD 3D designer. I need a highly specific 3D model script (OpenSCAD) for a "Pneumatic Morphing Hybrid Wing" to be tested in a small wind tunnel. The model must be fully 3D printable and structurally sound. [Core Geometry] Base Shape: A symmetric NACA 0012 airfoil. Dimensions: Chord length of 60 mm, and a total Span (height) of 120 mm. [Internal Pneumatic Chamber (Crucial)] 3. Hollow Interior: The wing must NOT be solid. It must have a hollow internal chamber (plenum) running vertically through the center, starting from the root up to 5mm below the tip. Wall thickness should be 1.5 mm to withstand air pressure while maximizing internal volume. [Leading Edge Features for Tubercles] 4. Inflation Holes: Along the absolute front of the leading edge, create a vertical array of circular holes. Hole Diameter: 3 mm. Spacing: One hole every 12 mm along the span. These holes MUST physically connect to the hollow internal chamber, allowing air f
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1778932675
Anonymous1778932675