3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
juncheng006
01-21 13:04
Model Name
outdoor insulated bin 3d model
Tags
3d printing
3d printing realistic
insulated
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
"Act as an Industrial Designer. Create a 3D printable design for a 'Smart Insulated Food Donation Bin' powered by an ESP32. The design must be a Secure Outdoor Locker with the following specifications: 1. Double-Walled Insulation: The main body must have hollow walls with a 20mm gap between the inner and outer shell to be filled with expanding foam or styrofoam sheets for temperature control. 2. Anti-Theft Door: A reinforced front door with concealed hinges (internal) so they cannot be unscrewed from the outside. The door must have a mounting bracket on the inside for a 12V Solenoid Lock latch. 3. Electronics Compartment: A separate, weather-sealed compartment on the side or top of the box (isolated from the food area) to house the ESP32, Relay, and Battery. This protects the electronics from food spills and condensation. 4. External Interface: The front of the electronics compartment must have a recessed slot for a 4x4 Membrane Keypad and a small cutout for a 16x2 LCD screen, protected by a rain overhang. 5. Food Capacity: The internal food storage area should be approximately 300mm x 300mm x 300mm (large enough for fruit bags or canned goods). 6. View: Provide a cross-section view showing the insulation gap and a technical drawing of the door locking mechanism."
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
juncheng006
juncheng006juncheng006