3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1761519579
11-04 01:10
Model Name
quadrotor frame 3d model
Tags
3d printing
3d printing realistic
motors
quadrotor
quadrotor frame
realistic
vehicle
vehicle 3d printing
vehicle 3d printing realistic
vehicle realistic
Input
Prompt
All units mm. Origin (0,0,0) = geometric center of the canopy bottom (midpoint between the four motor rings), X axis points forward (nose), Y axis to right, Z axis up. Wheelbase (center to center of motors) used for layout: 75 mm (Meteor75 typical). Motor ring centers: Front-Right: (+37.5, +37.5) Front-Left: (+37.5, -37.5) Rear-Right: (−37.5, +37.5) Rear-Left: (−37.5, -37.5) Outer prop ring diameter: 45 mm compatible; motor ring clearance outer OD ≈ 48 mm. Bottom flange (outer seating ring OD): 36.0 mm (this is the canopy bottom collar that mates to top deck); inner clearance hole: 30.0 mm. Flight Controller mount (holes): centered at origin, 26 × 26 mm square pattern. M2 holes (clearance Ø2.4 mm) at: ( +13, +13 ), ( +13, −13 ), ( −13, +13 ), ( −13, −13 ) — these four holes are countersunk on the canopy top if you prefer countersunk screws from above or through the FC stack; otherwise provide clearance only. Camera centerline (optical axis): Recommended camera lens center r
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1761519579
Anonymous1761519579