3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
backus13
10-03 18:16
Model Name
clip-on cap brim 3d model
Tags
3d printing
3d printing realistic
cap
flip cap
hinged lid
props
props 3d printing
props 3d printing realistic
props realistic
realistic
strap like
Prompt
A minimalist clip-on cap brim blinder, single reversible part. The main feature is a flat tapered shade panel, not doubled, not curved. The panel is rectangular, about 95 mm long parallel to the brim, about 55–60 mm wide front-to-back, 64 mm tall at the rear edge, 45 mm tall at the front edge, and about 2.5 mm thick. Surfaces must be flat, smooth, and plain with softly rounded edges. From one side of this panel extends a small cylindrical hinge, about 3.5 mm diameter, running parallel to the brim edge. The hinge connects the panel to a slim C-shaped clip. The clip is about 26 mm long, 12 mm deep, with an inner slot 3–6 mm wide to grip a baseball cap brim. The clip jaws are 2–3 mm thick and smooth outside. On the inside, add 2–3 shallow rounded ribs per jaw, about 0.5–0.8 mm tall and 1 mm wide, running front-to-back to improve grip. The clip should be slim and simple, not bulky. The hinge should be plain, no gears, no textures. The geometry must appear as one connected object: clip, hinge, and panel. It should look like a slim functional engineering part, symmetrical so it can be flipped left or right.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
backus13
backus13backus13