3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
backus13
10-03 18:23
Model Name
clip-on cap blinder 3d model
Tags
3d printing
3d printing realistic
carabiner clip
flip cap
props
props 3d printing
props 3d printing realistic
props realistic
realistic
strap like
Prompt
Minimalist clip-on cap brim blinder, single reversible part. The main feature is one thin flat tapered panel, not doubled, not curved. The panel is rectangular in plan but shorter at the front: about 95 mm long parallel to brim edge, about 55–60 mm wide front-to-back, ~64 mm tall at the rear, ~45 mm tall at the front, and ~2.5 mm thick. Surfaces flat and plain with softly rounded edges, no textures. Along one side of the panel is a simple cylindrical hinge, ~3.5 mm diameter, running parallel to the brim edge. This hinge connects to a slim C-shaped clip. The clip is ~26 mm long along brim, ~12 mm deep, with a narrow slot only 3–6 mm wide sized for a baseball cap brim. Jaws are 2–3 mm thick, smooth outside, but add 2–3 shallow interior ribs each jaw (0.5–0.8 mm high, ~1 mm wide, front-to-back) to increase friction. No sharp teeth. The hinge should allow the panel to rotate down beside the eye or fold up flat against the brim. Geometry must appear as one object: clip, hinge, and single tapered panel. Slim, functional, symmetric, printable.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
backus13
backus13backus13