3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
backus13
10-03 18:46
Model Name
c-shaped channel clip 3d model
Tags
3d printing
3d printing realistic
channel tufted
clip
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Create one C-shaped channel clip designed to slide over a thin plate. This clip is not a clamp and not a vise. It is shallow and slim, with flat jaws and rounded edges. Overall Dimensions: Length (X direction, along hat brim): ≈ 26 mm. Depth (Y direction, front-to-back): ≈ 12 mm. Slot gap (Z direction, jaw opening): strictly 3–6 mm. Jaws: Two parallel flat jaws form the slot. Each jaw thickness in Z: 2–3 mm. Outer surfaces smooth and plain, no decoration. Inner surfaces must include friction ribs: 2–3 ribs per jaw. Each rib height: 0.5–0.8 mm. Each rib width: ~1 mm. Ribs run lengthwise (X direction). Ribs are rounded bumps, not sharp teeth, not sawtooth serrations. End of jaws slightly radiused to help slide onto the brim. Hinge Ears: On the top outer face of the clip, add two clevis ears for hinge connection. Each ear thickness: 3.2–3.5 mm in Z. Inside gap between ears: ≈ 3.4 mm (to fit panel tab). Each ear has a coaxial round hole for a hinge pin. Hole diameter: 3.35 mm (designed for Ø3.5 mm pin with slight clearance). Axis of holes runs parallel to X (clip length). Ears extend upward ~6–8 mm from the clip body. Geometry Requirements: Clip is a single solid piece, printable. Symmetrical about a vertical plane at its midline (so it can be flipped). All edges rounded/filleted slightly for comfort and printability. No textures, no decorative holes, no extra thickness. Function is to hold a thin brim by friction — not a clamp, not serrated teeth.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
backus13
backus13backus13