3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
xxsavagekid92
02-25 07:33
Model Name
irregular mounting plate 3d model
Tags
3d printing
3d printing realistic
dimensionally
fillet radius
plate
props
props 3d printing
props 3d printing realistic
props realistic
realistic
shape
Prompt
Create a 3D model of a thin mounting plate using millimeters as the unit system. The model must be dimensionally accurate and suitable for 3D printing. Overall geometry: The object is a flat plate with constant thickness. Plate thickness: 6 mm Plate width (edge-to-edge perpendicular to length): 6 mm The plate follows an irregular bent path, not a simple rectangle. Outline shape (top-down profile): The plate consists of four main straight segments connected by rounded corners. Top horizontal segment: Length: 76 mm Orientation: horizontal Both top corners are 90° corners with rounded fillets Fillet radius at top corners: 10 mm Right vertical segment: Length: 176 mm Angle relative to top segment: 90° downward Corner between top and right segment is a 90° rounded corner Bottom segment: Length: 128 mm Angled such that: Bottom-right corner angle is 135° Bottom-left corner angle is 40° Bottom corners have rounded fillets Fillet radius at bottom corners: 14 mm Left slanted segment: Length: 272 mm Connects bottom-left corner back to the top-left corner Slanted inward, forming a closed loop Hole details (all holes go fully through the plate): All holes are circular through-holes Hole diameter: 11 mm Top holes: Two holes on the top horizontal segment Hole centers are 10 mm from the top edge One hole is 10 mm from the left rounded corner One hole is 10 mm from the right rounded corner Bottom holes: Three holes along the bottom segment Hole center spacing along the bottom segment: First hole: 14 mm from the bottom-left rounded corner Second hole: 62.5 mm from the bottom-left corner Third hole: 112 mm from the bottom-left corner All bottom hole centers are 7 mm from the bottom edge Edge treatment: All outer edges are smooth Corners are rounded using fillets, not sharp angles No chamfers unless required for printability Printing considerations: Model must be watertight (manifold) No overhangs exceeding 45° Flat orientation suitable for FDM printing Export format: Output as a clean, single solid body Suitable for export as STL or STEP Important: Maintain dimensional accuracy Do not approximate angles or hole positions Do not scale or stylize the model
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
xxsavagekid92
xxsavagekid92xxsavagekid92