lab coat 3d model

Create a 3D printable Bath & Body Works foaming soap holder. Separate parts only: a solid doctor's lab coat with three pockets and no center cutout, a separate heart-shaped stethoscope, and three separate half pens that can be glue over the top chest pocket. The coat should be a solid backing piece suitable for adding a custom negative cutout later. Clean edges, no openings on the sides, thick enough for FDM printing, optimized for PLA. The stethoscope and pens needs to be seperate from the lab coat. The stethoscope needs to have the round piece hanging, with a heart looped rubber piece leading up to one tube that will glue to the coat collar of one collar