3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768937923
01-20 19:57
Model Name
dragon bookmark 3d model
Tags
3d printing
3d printing stylized
dragon bookmark
printable
props
props 3d printing
props 3d printing stylized
props stylized
stylized
Input
Prompt
Create a 3D printable bookmark based on the uploaded image of a cute dragon. The model must be optimized for FDM 3D printing with NO supports, NO overhangs, NO bridges, and NO floating parts. Design requirements: - The bookmark must start from a completely flat base. - The lower part (the tongue that goes between book pages) must be flat, rectangular, and uniform, with a thickness between 1 and 2 mm. - The bookmark tongue must be long and simple, with NO decoration along its length. - The dragon must be positioned at the TOP EDGE of the bookmark, not centered. - The dragon must be attached only at one end of the bookmark tongue. - The dragon must extend above the top edge of the tongue, like a classic bookmark figure that remains visible outside the book. Flat and volumetric sides: - One side of the bookmark (the back) must be completely flat and continuous from the bottom of the tongue to the top of the dragon. - The opposite side (the front) may include controlled volume and rounded shapes. Dragon volume and relief: - From the flat base, the dragon shape must gradually rise using smooth vertical relief. - The dragon must have a semi-3D bas-relief appearance. - The face and the belly (stomach) must be slightly rounded and more volumetric than the rest of the body. - Rounded areas must rise progressively from the flat surface with smooth slopes. - Maximum thickness of the dragon area must be between 10 and 20 mm. Geometry integrity: - The dragon must be a single continuous solid shape. - NO floating objects or isolated elements (for example: flowers, hearts, or accessories separated from the body). - All details must be physically connected to the main dragon body. Side profile constraint (very important): - When viewed from the side, the wings, tail, and ears must be aligned at a similar height. - No element (wings, tail, ears, horns) may stick out higher or lower than the main dragon silhouette in a way that creates overhangs. - The side silhouette must be clean, compact, and vertically coherent. Printability constraints: - No undercuts. - No steep angles greater than 45 degrees. - All geometry must be printable layer by layer from bottom to top. - No floating or hidden geometry. Style and shape: - Keep the dragon cute and friendly, similar to the reference image. - Emphasize the face and belly using soft rounded volumes, not sharp edges. - Use height differences to define eyes, mouth, and facial expression. - The back of the bookmark must be completely flat. - The front must be a single continuous solid object. Technical constraints: - Single solid watertight mesh. - Flat bottom surface. - Suitable for 3D printing without supports. - No thin or fragile parts. The final object should look like a Saint George themed dragon bookmark, with the dragon located at the top end of the bookmark tongue, flat on one side and softly rounded on the other, with no floating elements, designed specifically for easy and reliable 3D printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768937923
Anonymous1768937923