3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
natiliavtest
02-25 01:20
Model Name
award medal 3d model
Tags
3d printing
3d printing realistic
award medal
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a 3D printable championship medal exactly as follows: Wide horizontal rectangle (landscape orientation). Width: 100mm Height: 45mm Thickness: 14mm Sharp industrial straight edges with very small 1mm corner radius (almost square). Heavy, solid block appearance. Front design: Outer frame: raised 5mm thick border around entire rectangle. Frame depth: raised 3mm above inner surface. Frame color: silver/white. Inner panel: recessed 2mm inside the frame. Surface color: matte black, completely flat. Centered text: “UTMA” Font: bold, wide, aggressive athletic sans-serif. Text slightly italic forward 12 degrees. Text stretched 110% horizontally. Letters raised 3mm from black surface. Text color same as frame (silver/white). Top attachment: Two solid rectangular lugs (10mm width each, 6mm thick) centered at top edge with a 30mm wide horizontal slot between them for ribbon. Back side: completely flat. Minimum wall thickness 3mm. No curves, no decorations, no extra text. Solid watertight mesh. Optimized for FDM printing. Output: STL file ready for print.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
natiliavtest
natiliavtestnatiliavtest