3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1768671641
01-17 18:29
Model Name
flame display case 3d model
Tags
3d printing
3d printing stylized
furniture
furniture 3d printing
furniture 3d printing stylized
furniture stylized
printable
rectangular card
stylized
Prompt
Create a 3D printable decorative display CASE ONLY. This model must be an empty outer frame designed to hold a rigid rectangular card holder inserted later by the user. The interior must be completely empty. DO NOT create a card. DO NOT create a slab. DO NOT create labels, text, logos, titles, or branding. DO NOT show or include any internal object. The display case should be vertical and slim, with an internal rectangular cavity sized approximately 71 mm wide × 104 mm tall × 8 mm deep. These dimensions are for internal clearance only. The internal cavity must be plain, flat, and undecorated. The exterior of the case must be fully covered in raised, extruded flame-like designs inspired by Lead-type Pokémon aesthetics. The flames should have jagged, heavy-flowing shapes with sharp edges, resembling molten metal or industrial energy flames. The flame geometry must be smooth enough for 3D printing while maintaining sharp, dynamic shapes. Flames must protrude outward from the surface and must not be engraved, recessed, or indented. The flame design must cover *all six outer surfaces*: - front - back (fully sculpted, not flat) - left side - right side - bottom - top Flames should *wrap fully around all corners and edges*, forming a continuous, aggressive 360° sculpt. The top edge must feature large upward-rising flames, with tips extending above the top of the case. The back surface must be completely sculpted in the same jagged Lead-type flame style as the front, with no flat or plain areas. There must be no flat border, bezel, rim, or smooth frame between the opening and the flames. The flames must begin immediately at the opening edge, wrapping partially into the inner perimeter to integrate the opening into the sculpture. The opening must remain empty and must not contain a card, holder, or preview object. The model must be suitable for *resin 3D printing* and exportable as an *STL file*, with clean topology and printable wall thickness. The geometry must balance fine detail and smooth surfaces to avoid noisy or uneven textures, while retaining jagged, dynamic Lead-type flame shapes.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1768671641
Anonymous1768671641