3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1783291299
07-06 02:00
Model Name
arduino mega 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a 3D-printable holder for an Arduino Mega 2560 R3 and a 1.5-inch SPI OLED display module. The design should be sturdy, easy to print in PLA without supports, and allow both components to be removed if needed. The Arduino Mega dimensions are 101.5 mm × 53.3 mm × 1.6 mm. Include four 6 mm tall mounting standoffs with M3 screw holes and about 2 mm clearance around the board. The board should sit securely while keeping the USB Type-B port fully accessible for programming and power. Also leave access to the DC barrel jack, reset button, and main connectors. The OLED module is approximately 42 mm × 35 mm × 6 mm with a visible display area of about 30 mm × 30 mm. Create a recessed mount that exposes only the screen while holding the module securely with clips or screw mounts. Leave an opening behind the display for the SPI pins and wiring. Position the OLED above the Arduino with about 20 mm of space between them for cable routing. Include built-in cable channels to keep wires organ
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1783291299
Anonymous1783291299