3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1762849433
11-16 16:13
Model Name
rectangular enclosure 3d model
Tags
3d printing
3d printing realistic
box
enclosure
props
props 3d printing
props 3d printing realistic
props realistic
realistic
rectangular enclosure
Input
Prompt
Create a 3D-printable hollow rectangular enclosure designed like a tile. Main box size: approximately 16 cm × 16 cm × 6 cm. The interior of the main box must be completely empty and hollow, with only four screw bosses in the corners to attach the lid. The top lid should be flat and clean with NO holes. The lid should screw on and be removable. On the right side of the main box, attach a smaller external water-collection box (about 6 cm × 6 cm × 6 cm) with a fully open top. Between the external mini box and the main box, create one circular hole in the center of the connecting wall. This hole is for inserting a turbidity sensor. Do NOT add the sensor—only create the hole. On the opposite side of the main box (left side), create a circular mounting hole for a float switch (SEN0204 type). This hole should be centered on the side wall, opposite the turbidity sensor hole. Do NOT add the float switch—only create the hole. Do not add any other holes, vents, or internal fittings. Walls should be 3 mm thick with smooth edges and light rounding. Ensure the design is watertight, manifold, and ready for 3D printing as two STL files: 1. Base (main box + external water box + holes) 2. Lid (flat, screw-on).
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1762849433
Anonymous1762849433