3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
roudy.sayfi2002
02-28 19:12
Model Name
speech bubble keychain 3d model
Tags
3d printing
3d printing realistic
keyring hole
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a 3D printable keychain. Base shape: rounded rectangle, 60 mm tall × 38 mm wide × 4.0 mm thick, corner radius 6 mm. Keyring hole: 6.5 mm diameter centered 6 mm from the top edge, with a 2.5 mm thick reinforced ring around the hole. Back face: perfectly flat, no text, no texture. Keep at least a 32 mm × 32 mm flat safe zone centered on the back for later NFC pocket subtraction. Front design: a simple speech bubble outline centered, with a single music note inside and two small sparkles (4-point stars) on the top-right. Text: bold sans-serif “POP” under the bubble, centered, large and readable. Relief: outlines and text raised 1.2 mm above the base; optional mid-level fill elements raised 0.6 mm. Minimum line width 1.2 mm, fillet all edges 0.6 mm. Keep geometry manifold and watertight. No overhangs beyond 45 degrees.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
roudy.sayfi2002
roudy.sayfi2002roudy.sayfi2002