3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1769083862
01-22 12:23
Model Name
construction helmet 3d model
Tags
3d printing
3d printing realistic
build
construction
construction helmet
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a 3D printable keychain object shaped like a construction helmet, not a real helmet. The object must be a single, watertight, manifold solid volume. The interior must be completely solid — no hollow shell, no internal cavities, no inner surfaces, no thin walls. The model must be generated as a solid mass, equivalent to 100% infill, not a shell. The entire bottom of the object must be a single, perfectly flat plane, created by a straight planar cut. The base must be 100% flat, smooth, and level, with full-area contact on the build plate. No curvature, no steps, no bumps, no feet, no pins, no internal voids touching the base. The object must be pre-oriented for 3D printing, resting on this flat base, with no supports required. On the exact back center of the object, add one single circular hole for a keychain. The hole must be centered, clean, and perpendicular to the flat base. Do not add any additional holes. Do not place holes on the sides or corners. Use only the uploaded image as reference for the front logo geometry. The logo must be identical to the uploaded image, with no interpretation or modification, embossed 3.0 mm with sharp edges. Do not model realistic helmet interiors, straps, suspension, vents, rims, shells, or structural details. The final mesh must be clean, closed, and free of self-intersections, suitable for direct slicing and printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1769083862
Anonymous1769083862