3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773174666
03-11 10:31
Model Name
captain america 3d model
Tags
character
3d printing
stylized
Prompt
Create a 3D-printable mi"Captain America stands in a powerful, commanding pose, holding his iconic shield steadily. Dressed in his classic comic uniform, positioned on a standardized, circular chess base with a subtle design. Model height approximately 80 millimeters."niature of Captain America in a powerful, commanding stance, holding his iconic round shield steadily. He wears his classic comic uniform. The figure stands on a standardized circular chess-style base with a subtle, unobtrusive design. Target figure height is approximately 80 mm. Objective - Produce a clean, watertight, print-ready character sculpt that captures a heroic, authoritative presence and iconic silhouette while remaining stable on a chess-style base. Design Intent (reasoning before execution) - Iconicity: Prioritize instantly recognizable elements (round shield with central star and rings; chest star; scale-textured torso; ‘A’ on cowl; gloves/boots; belt pouches). - Stability: Keep center of mass within the base footprint; avoid top-heavy shield placement; ensure broad, planted stance. - Printability: Favor emboldened, shallow relief details; minimize unsupported overhangs; split parts and key joints for clean assembly. Pose and Composition - Stance: Left foot forward, right foot back, slight knee bend; hips and shoulders counter-rotated for dynamic tension; head forward and slightly up. - Shield: Held steadily on the left forearm, face angled ~30–45° toward the viewer; edge not extending beyond base diameter. - Right arm/hand: Fist at side or lightly clenched near belt; posture conveys command rather than motion. - Silhouette: Triangular upper-body massing; shield reads clearly from front and 3/4 views; no major elements hidden behind others. Costume and Prop Details (classic comic) - Torso: Five-point chest star; stylized scale mail on upper chest/shoulders (shallow, printable pattern). - Colors for reference only (model is monochrome): blue cowl/torso, red gloves/boots, white accents; ‘A’ on forehead; optional small wing motifs on cowl as low-profile relief. - Belt: Simple pouches (2–3 mm proud); straps for shield with visible buckles; avoid micro-details below print resolution. Chess-Style Base - Default spec: 35 mm diameter, 5 mm height; 0.8–1.0 mm top edge chamfer; subtle concentric ring or minimal insignia; bottom flat. - Stability: Feet fully within base; add discrete contact pins under boots if needed. - Optional: 6×2 mm magnet recess on underside (centered), filleted edges. Scale and Dimensions - Default measurement: 80 mm from top of head to top surface of base (figure height); base adds 5 mm (total ~85 mm overall). - Shield diameter: ~32–34 mm; shield thickness: 2.0–2.5 mm rim, 1.2–1.6 mm face. Part Breakup and Assembly - Separate parts: head; right arm; left arm with shield; body/legs as one; base separate. - Keys: D-shaped or trapezoidal pegs, 3.0–4.0 mm diameter/width, 0.2–0.3 mm clearance; keyed orientation prevents misalignment. - Drain holes (for hollowed resin parts): 2–3 hidden holes, 2 mm diameter minimum. Printability Constraints (defaults) - Intended process: resin SLA/DLP. - Minimum embossed/engraved detail: ≥0.3 mm height/depth; minimum wall: ≥0.8 mm (resin) or ≥1.2 mm (FDM variant). - Overhangs: keep ≤55° where possible; add supporting contact pads under overhang-prone features. - Avoid knife-edges; fillet or chamfer thin rims. Topology and File Prep - High-poly sculpt: 2–6 million tris acceptable; decimate to 600k–1.2M for print part files. - All exports manifold, no self-intersections, outward normals, single watertight shell per part. - Hollow large parts (2.0–2.5 mm wall) for resin to reduce suction; leave internal bridges open. Deliverables - Print-ready STLs: one per part, oriented as exported, in millimeters. - Assembled one-piece STL variant (for larger printers) with same scale. - Optional: pre-supported resin STLs and Lychee/ChiTu project files (.lsp/.ctb) with support settings noted. - Source: high-poly OBJ or ZTL; simple exploded diagram or labeled screenshot of part layout. - Readme: scale reference, assembly notes, and recommended printer settings. Quality Checklist (acceptance criteria) - Stands flat and stable on base; no part extends beyond base edge. - Iconic elements readable at arm’s length: shield star/rings, chest star, ‘A’ on cowl, belt pouches. - No overhangs beyond guidelines without clear support strategy; no fragile spikes <0.8 mm (resin) or <1.2 mm (FDM). - All parts key together with stated clearances; test alignment virtually (no collisions); - Files open without repair in PrusaSlicer/Lychee/Chitubox; passes netfabb/manifold check. Examples (pose variants—choose closest to intent) - Variant A (default): Shield forward at ~35°, right fist at side, chin up, commanding. - Variant B (more guarded): Shield vertical near left thigh, right hand on belt, torso slightly turned. Output Format - Provide a ZIP containing: /STL_print (individual parts + one-piece), /Source (OBJ/ZTL), /Slicer (optional project files), README.txt with scale and settings. - Units: millimeters; origin centered at base; +Z up.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773174666
Anonymous1773174666