3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1774735324
05-13 21:39
Model Name
phone case 3d model
Tags
3d printing
3d printing realistic
phone
phone case
props
props 3d printing
props 3d printing realistic
props realistic
realistic
samsung
Prompt
Create a 3D printable snap-on phone case for the Samsung Galaxy S21 5G (151.7 x 71.2 x 7.9mm). The case should have 2mm wall thickness, a raised front lip bumper, and precise cutouts for the USB-C port (bottom center), volume buttons (left side), power button (right side), and the rear triple-camera module (top-left). On the back exterior of the case, add an integrated cradle/pocket to hold a Shopify Tap & Chip card reader (approximately 67mm wide x 43mm tall x 10mm deep). Position the cradle in the lower-center or lower-right of the back face. Orient the cradle so the card insert slot of the reader faces UPWARD, toward the top of the phone and the rear camera array. The cradle should be a three-sided pocket (open on the top/card-slot side), with 1.5mm snap-lip overhangs on the left and right inner walls to retain the reader. Include a 20mm thumbhole cutout on the bottom of the cradle for easy reader removal. Total added depth from the cradle should be no more than 12mm
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1774735324
Anonymous1774735324Anonymous1774735324