3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773429141
03-13 19:27
Model Name
bedside charging stand 3d model
Tags
3d printing
3d printing realistic
charging case
props
props 3d printing
props 3d printing realistic
props realistic
realistic
samsung
usb c charging
Prompt
Create a 3D printable STL model of a 3-in-1 bedside charging stand designed for Samsung devices. The stand must hold: • A Samsung Galaxy S24 Ultra vertically with a slight viewing angle (about 65 degrees). • A **Samsung Galaxy Watch 7 charger puck mounted in a round recessed hole so the magnetic charger sits flush inside the stand. • A tray compartment for a **Samsung Galaxy Buds charging case. Design specifications: • Phone slot width: 88–90 mm to fit phone with case. • Phone slot depth: 15 mm. • Include a USB-C charging cable hole at the bottom of the phone slot with a cable routing channel through the back of the stand. • Watch charger recess: circular hole about 30 mm diameter and 6 mm depth with cable channel routed through the base. • Earbuds holder: small tray approx 70 × 60 mm with a 5 mm lip to keep the case from sliding. • Wide stable base for bedside table use. • Hidden cable management channels under the stand. • Smooth rounded edges with a minimalist modern design. • Base thickness 10 mm for stability. • Add rubber foot recesses underneath (4 small circular pockets). 3D printing requirements: • Optimized for FDM printing using PLA or PETG. • Print without supports if possible. • Minimum wall thickness 3 mm. • Chamfer or fillet edges (3 mm radius). • Flat bottom surface for easy bed adhesion. Output a clean single-piece STL model ready for 3D printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773429141
Anonymous1773429141