3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
highlanderchue
03-25 18:22
Model Name
round-to-flat nozzle 3d model
Tags
3d printing
3d printing realistic
adapter
blower
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a 3D printable STL model of a round-to-flat-oval nozzle adapter for a cordless air blower / leaf blower. The adapter must slide and fit tightly OVER the outside of the blower's round outlet tube. Exact dimensions for the round fitting part (the socket that goes over the blower): - Inner diameter of the socket: 66.0 mm (slightly tight press-fit over 65.5 mm outer diameter) - Wall thickness: 3 mm - Length (depth) of the cylindrical socket: 45 mm After the 45 mm socket, the adapter smoothly transitions into a flat oval nozzle. The oval outlet should be approximately 80 mm wide × 20 mm high (flat and wide for strong directed airflow). The transition section should be about 40-50 mm long, with smooth walls, no sharp edges. Total length of the whole adapter: around 90-100 mm. Add a small internal lip or stop (about 2 mm thick) at the end of the socket so it doesn't slide too far onto the blower. The model must be manifold, watertight, and ready for 3D printing. Use PETG or ABS recommended material in mind (thick walls: at least 3-4 perimeters). Make the walls strong (minimum 3 mm thickness everywhere) because it will receive high air pressure. Export as a single clean STL file
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
highlanderchue
highlanderchuehighlanderchue