3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1775986813
06-16 07:58
Model Name
wooden water flume 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
water
watermill
Prompt
Create a 3D printable STL model of a rustic wooden water flume for a miniature watermill. Dimensions: 100mm long, 25mm wide, 20mm high. Rectangular wooden trough, not round. Realistic aged wood texture with deep grain, knots, cracks, rough carved timber, medieval mill style. Top channel open along approximately 80-85% of its length so water is visible. Rear section (15-20mm) must be covered on top, forming a hidden chamber. Only one hole in the entire model: a centered rear hose inlet, diameter 6-8mm, located on the back face only. No holes on sides, top, bottom or front. Water enters through the rear hose hole into the hidden chamber, then flows into the open channel and exits from the completely open front end as a waterfall. Model must be watertight, manifold, clean STL, optimized for FDM printing in PLA/PETG. Include front, rear, side and top details. Highly realistic wood grain and rustic appearance.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1775986813
Anonymous1775986813