venturi meter 3d model

Create a clean engineering 3D model of a Venturimeter used for fluid mechanics experiments. The model should consist of a straight inlet pipe, a smooth converging section, a narrow throat, and a smooth diverging section followed by an outlet pipe. The inlet and outlet pipe diameter should be 40 mm and the throat diameter should be 20 mm. The inlet straight section length should be 150 mm, the converging section length 80 mm, the throat length 40 mm, the diverging section length 200 mm, and the outlet straight section length 150 mm. The model should be symmetrical along the center axis and suitable for CFD simulation. Use smooth surfaces and maintain a continuous internal passage for water flow. The model should look like a PVC pipe Venturimeter used in laboratory experiments. Short Prompt (if the website requires small input) 3D engineering model of a Venturimeter flow meter with 40 mm inlet and outlet pipe diameter and 20. 3D engineering model of a Venturimeter flow meter with 40 mm inlet and outlet pipe d