3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1763215100
11-17 05:20
Model Name
humanoid robot head 3d model
Tags
3d printing
3d printing sci fi
humanoid robot head
machine
machine 3d printing
machine 3d printing sci fi
machine sci fi
sci fi
Prompt
Create a clean, futuristic humanoid robot head optimized for 3D printing on a Creality Ender-3. Height 200 mm, width 120 mm, depth 140 mm. The style is a smooth sci-fi humanoid, with slightly angular forms but no thin or fragile parts. Key features on the front: – One main camera eye in the center of the face: a circular recess 20 mm in diameter with a flat area behind it for mounting an ESP32-CAM camera module (28×40 mm PCB). – Below the camera eye, add a small flat area for a Time-of-Flight distance sensor VL53L0X (8×12 mm opening). – Above the camera, on the forehead, add a circular opening 20–22 mm for a PIR motion sensor lens. – On the forehead slightly above the PIR, add a tiny round opening (2–3 mm) for a light sensor BH1750. On the sides: – On each temple, create flat touch areas about 25×35 mm for capacitive touch sensors (TTP223) with 1–1.5 mm thin plastic thickness above them. – On the left side, add a tiny sound hole (3–4 mm) for an I2S microphone. For the top and back of the head: – Smooth curved back of the head, with a removable top access panel suggested by a shallow seam line. – The back of the head must be thick enough (2.5–3 mm wall thickness) to drill or cut holes later. Underside of the head: – A circular neck opening about 50 mm inner diameter and 70 mm outer flange, to mount on a neck ring driven by an MG996R servo. – Leave enough flat inner surface around the neck opening to bolt an inner frame and servo brackets. The model must be watertight, manifold, no self-intersections, with all walls at least 2.5 mm thick, and designed as a 3D-printable shell without tiny fragile details.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1763215100
Anonymous1763215100