raspberry pi enclosure 3d model

Create a compact professional classroom recording device enclosure designed around a Raspberry Pi. Use a rounded rectangular housing, approximately 160mm wide, 100mm tall and 35mm deep, with a clean industrial design. On the FRONT, place a single camera lens horizontally centered in the upper section, about 15–20% below the top edge. The lens should be slightly recessed, face directly forward and use a wide-angle view. No LED ring. Place HDMI, USB and power ports on the REAR and side edges for clean cable routing. Add ventilation slots to the top and bottom. Use a subtle two-piece enclosure seam with realistic wall thickness. The BACK should have a removable mounting system consisting of a slim mounting plate, four screw holes, keyhole wall slots, cable clearance and a secure slide-lock mechanism so the recorder can detach from the plate. Add internal screw bosses and supports for the Raspberry Pi and camera. Make the design realistic and suitable for 3D printing or injection molding.