rummy tile stand 3d model

Create a curved Rummy tile stand, similar to a gentle arc shape, designed for 3D printing. The stand should be long and slightly curved, not a perfect semicircle, matching the shape of a traditional Rummy rack. The top should have one continuous long slot running along the entire length to hold Rummy tiles, instead of many small slots. Slot dimensions: – slot width: 3–4 mm – slot depth: 8–10 mm Overall dimensions: – length: 280–300 mm – height: 20 mm – thickness: 15 mm The bottom must be flat and stable for table use. The design should be minimal and functional, with smooth surfaces, no decorations, and no logos. The model must be one single solid piece, optimized for FDM 3D printing, with no supports required and no overhangs. Export the final result as an STL file. The stand should have a flat bottom and a semicircle shape when viewed from the top. Add 15 straight vertical slots on the curved side to hold Rummy tiles. Each slot should be approximately 3 mm wide and 8 mm deep, evenly spaced along t