removable corner clamp rack 3d model

Create a detailed 3D CAD model of a removable corner clamp rack assembly for an Argentine asado parrilla grill. Model one corner assembly first. It should be designed to slide over the outside sharp 90-degree corner of Base 1. Base 1 is made from 1/8-inch steel plate with a straight 5-inch-tall flange and no top lip, rolled edge, or angle iron. The removable clamp should be a full plate box sleeve/corner cap. It wraps around both sides of the Base 1 corner and clamps onto the flange using set screws. The clamp body uses 3/16-inch steel plate. The top mounting deck, pivot ears, angle adjustment plate, pivot arm, and gussets use 1/4-inch steel plate. Model the clamp body with: * Two outside plates: 6 inches x 5-1/2 inches x 3/16 inch. * Two inside retainer plates: 5-1/2 inches x 4-1/2 inches x 3/16 inch. * Internal sleeve clearance: approximately 1/4 inch for the 1/8-inch Base 1 flange. * Two top cap plates: 6 inches x 2-1/2 inches x 1/4 inch, forming an L-shaped top deck. * Optional