dive boat 3d model

“Create a detailed 3D model of a rigid fiberglass dive boat based on the reference photos. The boat is approximately 8 meters long and 2.5 meters wide. It has a deep V hull with a pronounced bow entry and a wide, slightly rounded transom. The hull should be designed for offshore diving activities and stable at sea. Exterior: Smooth white fiberglass topsides Dark red / antifouling lower hull below the waterline High freeboard and thick gunwales Deep V hull extending from bow to stern Broad bow with rounded upper edges Simple workboat style, functional rather than luxury Deck layout: Open center-console layout Small helm console located slightly forward of center Bench seat in front of the console Small rear bench or side seats near the stern as shown in the photos Large open deck area in the middle and aft section for dive equipment Non-slip deck texture Integrated storage lockers under the seats Modify the original boat to become a dedicated dive boat for: 12 people total: 8 divers, 2 dive instructors,