3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1772971697
03-08 13:53
Model Name
wearable obstacle sensor 3d model
Tags
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
vibration motor
Prompt
Create a detailed 3D model of a wearable obstacle detection system mounted on a posture harness. The harness has shoulder straps and two arm bands. On each arm band, place a small protective electronics case that contains a vibration motor and a small driver circuit. The case should be open at the top so the internal components like the motor, small PCB, and wires are clearly visible. On the front chest area of the posture harness, mount four HC-SR04 ultrasonic sensors in separate small protective cases. Each case should also be open from the top so the sensors and wiring can be seen clearly. The sensors should face forward for obstacle detection. Place an ESP32 microcontroller inside a protective electronics enclosure on the upper back side of the harness. The case should be open from the top so the ESP32 board and connections are visible. At the lower back side of the harness, place a power supply module containing a Li-ion battery and a buck converter inside another protective case with an open top to show the battery and circuit clearly. Show realistic wire routing along the harness straps connecting the ultrasonic sensors, vibration motor modules, ESP32, and power supply. The design should look like a practical engineering prototype with visible components, neat wiring, and small 3D printed protective cases. Use realistic materials such as fabric straps for the harness and matte black plastic for the electronics enclosures.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1772971697
Anonymous1772971697Anonymous1772971697