3d model automated microscope

machine machine realistic machine rendering machine rendering realistic magnification optics realistic rendering rendering realistic

Prompt

Create a detailed 3D model of an automated OpenFlexure microscope with the following components arranged in this exact optical configuration: **OPTICAL ARRANGEMENT **(from top to bottom) 1. **Top**: RMS-threaded microscope objective lens (40x magnification, silver metal, 23mm diameter) mounted vertically 2. **Middle**: 12.7mm diameter achromatic doublet tube lens (50mm focal length, clear glass with gold-colored coating rings, 5mm thick) positioned horizontally in a black 3D-printed cylindrical optics module holder (push-fit design, 40mm length) 3. **Bottom**: Raspberry Pi Camera Module 3 (black PCB board, 25mm x 25mm square, with lens removed, facing upward toward the tube lens) attached to the bottom of the optics module with two M2×6.5mm screws 4. **Connection**: 200mm thin ribbon cable (gray, flat, 10mm wide) connecting the camera module to the right side of the Pi board 5. **Mounting**: Black 3D-printed base plate (80mm x 80mm square, 10mm thick) with M3×10mm screw visible o

v3.1-20260211

Related Models

3d model: winged metal lamp with crystal lattice wings and warm light

3d model: gray metal robot leg segment with articulated joints and panel surface

3d model: round woven bamboo chair with circular seat and ribbed texture in beig

3d model: black plastic circular lid with ribbed exterior and smooth inner surfa

3d model: sleek futuristic humanoid robot with glowing eyes high polish metalli

3d model: female figure sculpture entwined with cacao pods beans and leaves on

3d model: weathered gravestones with skull motifs and ivy ravens perched among

3d model: ornate ganesha statue head with gold crown pink ears and decorative