3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1765129042
03-02 08:01
Model Name
question block 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
question block
realistic
Prompt
Create a detailed 3D printable model of a large Mario-style “Question Block” storage box. Specifications: • Overall size: 305mm x 305mm x 305mm cube • Open top (no fixed lid) • Wall thickness: 2mm • Designed for FDM 3D printing (0.6mm nozzle, PETG) • Model must be hollow to save material Structure: • Box should be hollow with uniform 2mm wall thickness • Interior should be empty • Bottom closed • Top fully open Front Face Details: • Raised “?” symbol centered on one face • Question mark thickness: 3mm embossed outward • Clean, block-style font (arcade style, not thin font) • Proportional size: about 140mm tall Corner Details (All 4 faces): • Four circular raised corner dots on each face • Diameter: 20mm • Thickness: 3mm raised • Positioned approximately 25mm from each edge Edge Styling: • Front face outer border chamfered 2–3mm • Slight edge bevel for arcade look • Sharp but printable edges Lid: • Separate flat lid panel • 305mm x 305mm • 2mm thick • Optional magnet pockets inside top rim • Magnet pocket size: 10.2mm diameter, 3mm deep • 4 magnet holes evenly spaced Printing Requirements: • No internal supports required • Clean manifold geometry • Single solid body per part • Split into two horizontal halves at 152.5mm height (for 250mm print bed compatibility) Output: • Provide separate STL files: Box Bottom Half Box Top Half Lid Style: • Smooth surfaces • No unnecessary mesh density • Optimized for low material usage • Clean symmetrical geometry
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1765129042
Anonymous1765129042