3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1769931206
02-01 12:04
Model Name
medieval fantasy coin 3d model
Tags
3d printing
3d printing medieval
medieval
medieval coin
props
props 3d printing
props 3d printing medieval
props medieval
Input
Prompt
Create a fantasy coin optimized for thin 3D printing. Coin specifications: Diameter: 35 mm Total thickness: 3 mm The coin is split into two separate printable halves, front and back Each half is 1.5 mm thick Inner surfaces are perfectly flat for gluing Relief requirements: Embossed relief height: 0.5–0.7 mm maximum All details must be bold, simplified, and high-contrast No fine lines, no micro details Front face: A centered fantasy emblem (dragon head / medieval castle / trident), stylized like a stamped coin. Strong silhouettes, exaggerated shapes, readable at small height. Back face: Simple medieval ornamental pattern or symbol, less detailed than the front. Edge design: Thin raised circular rim, 0.8–1.0 mm wide No undercuts No sharp knife-like edges 3D printing constraints: No undercuts or floating geometry Minimum feature thickness: 0.8 mm Suitable for PLA, 0.4 mm nozzle Printable flat on the build plate No supports required Style: medieval fantasy coin, bold embossed relief, clean topology, matte surface. Output as two separate watertight STL meshes, front and back.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1769931206
Anonymous1769931206