3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
3D Creation Made Simple
Text & Image to 3D Model in seconds
One-Click Texturing & Smart Detail Editing
Free Credits Monthly
Start Free
Anonymous1765983790
12-17 15:03
Model Name
scope mount 3d model
Tags
props
rendering
realistic
Prompt
Create a functional, 3D-printable Starlink Gen 3 mount with an integrated fifth-wheel kingpin hitch shank. Object 1: Starlink Gen 3 mount (top) - A rigid clamp/collar that securely grips the Starlink Gen 3 mast/pole. - Inner diameter: [MEASURED_MAST_OD] mm with 0.5–0.8 mm clearance for slip-fit, plus a split clamp design. - Clamp height: 80–120 mm. - Use a two-piece split clamp with 4x bolt holes for M6 hardware (or 1/4-20), evenly spaced, with hex nut traps. - Add a keyed anti-rotation feature (e.g., internal rib or flat) if the mast has any flat/key; otherwise include a shallow textured inner surface for grip. - Include a cable routing channel and a strain-relief loop, keep-out zone so the cable cannot pinch. - Add drainage holes and rounded edges (fillets) everywhere. Object 2: Integrated shank + kingpin (bottom) - From the underside of the clamp, a reinforced vertical spine transitions into a standard fifth-wheel kingpin. - Kingpin geometry: 2.0 inch (50.8 mm) diameter shaft with a proper shoulder and a locking groove/profile compatible with common fifth-wheel jaws (SAE-style). Overall kingpin length below the shoulder: [LENGTH] mm. - Add thick gussets/ribs between the clamp base and the spine to handle wind load and vibration. - Target wall thickness: 6–10 mm on structural areas, 4–6 mm elsewhere; add internal ribs instead of making everything solid. - Ensure the model is watertight/manifold, no non-printable floating parts. Print/engineering requirements - Designed for outdoor use, vibration, and high wind load while driving. - Avoid sharp internal corners; use generous fillets (3–8 mm) on load transitions. - Provide two versions: (A) single-piece for large printers, (B) modular: clamp + spine/kingpin with a keyed dovetail joint and 4x through-bolts. - Orientation: recommend printing so layer lines do not align with the main bending axis (design should tolerate this). - Output as a clean, symmetrical mesh with correct scale in millimeters. Appearance - Matte, utilitarian, minimal branding, no logos.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Expires in: 00:00:00
