3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
pdxcvadam
11-14 17:16
Model Name
tamper-resistant tablet case 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
samsung
Prompt
Create a functional, two-piece tamper-resistant tablet case for the Samsung Galaxy Tab A9+ (285.4 × 185.9 × 6.9 mm). Design requirements: Two sections: a full back shell and a separate front bezel (“picture frame”) that screw together around the tablet. Material: PA12 nylon (SLS/MJF) — model must be watertight, with realistic wall thickness (2.2–2.8 mm) and internal ribbing for stiffness. Fastening: perimeter-mounted M3 Torx security screws, recessed flush or below the surface in countersunk pockets. Screw holes should align through both pieces with at least 14 evenly spaced screws total. Openings: precise cutouts for Power button Volume rocker USB-C charging port 3.5 mm audio jack Do not include openings for the rear camera or side SD slot Form: rounded exterior edges, no sharp corners, with a slight 1 mm protective lip above the screen surface. Anchoring: include a small tether point or loop for a zip-tie ID tag. Anti-tamper features: Recessed seam between bezel and back shell (hard to pry). Captive heat-set insert geometry for M3 brass inserts in the back half. Finish: model surfaces slightly textured (sandblasted nylon feel). Target assembly clearance: 0.3 mm between parts for print fit. Color: semi-opaque or white tone (visual cue only). Output: two separate watertight solids named PDX3D_TabA9plus_BackShell PDX3D_TabA9plus_Bezel
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
pdxcvadam
pdxcvadampdxcvadam