3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1772081403
02-27 03:55
Model Name
eagle emblem 3d model
Tags
abstract / symbol
3d printing
stylized
Input
Prompt
Create a high-detail 3D printable eagle emblem based on the uploaded reference image. IMPORTANT SCALE REQUIREMENTS: Total emblem width: 18 mm Total emblem height: 14 mm Thickness: 2.5–3 mm Back surface must be flat for easy attachment to cap Add a 0.8 mm slight back lip or shallow mounting pad for glue stability The emblem must be properly proportioned to fit a 10 cm tall chibi figurine cap. STYLE & DETAIL LEVEL: Accurate Egyptian-style eagle based on reference image Wings fully extended horizontally Clean symmetrical geometry High detail but optimized for 3D printing Raised relief sculpt (bas-relief style) Clear separation between feathers CENTER SHIELD DETAILS: Shield divided into three vertical sections Slightly raised borders Inner sections slightly recessed (0.4–0.6 mm depth difference) Keep surfaces smooth (no texture noise) FEATHER DETAILS: Layered feather rows Clean sharp edges Minimum feather depth: 0.5 mm for resin printing Avoid ultra-thin geometry No floating micro details BOTTOM BANNER: Simplified ribbon shape Raised border Arabic text area should be engraved at 0.5 mm depth Make text legible at small scale Minimum line thickness: 0.4 mm PRINT REQUIREMENTS: Solid watertight mesh Manifold geometry No overlapping surfaces Optimized for resin printing Clean STL output No non-manifold edges No micro geometry under 0.3 mm MATERIAL OPTIMIZATION: Designed for resin 4K–8K printing Minimum thickness everywhere: 0.8 mm Reinforced wing tips (avoid breakage)
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1772081403
Anonymous1772081403