3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777217595
04-26 15:49
Model Name
firefighter door wedge 3d model
Tags
props
3d printing
realistic
Prompt
Create a highly detailed 3D model of a firefighter door wedge designed for 3D printing. The wedge should be exactly 4.0 inches long, 1.6 inches tall at the thick end, and 1.0 inch wide. The bottom surface must be perfectly flat from front to back. The top surface should slope smoothly downward from the rear (1.6 inches tall) to the front tip (near zero height). Add evenly spaced traction ridges across the entire sloped top surface, running perpendicular to the length. On one side of the wedge, emboss the letters "FSM" in large, bold, block-style capital letters. The lettering should be centered horizontally, positioned along the lower half of the side, and protrude outward approximately 0.12 inches. The letters should follow the slope naturally while remaining easy to read from the side. The wedge should have slightly rounded edges and corners for durability and comfort. Design the model as a single watertight solid optimized for FDM 3D printing, with no unsupported overhangs, no int
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777217595
Anonymous1777217595