steampunk decorative 3d model

Create a highly detailed 3D-printable Victorian steampunk slip-on cover for GLEDOPTO GL-C-619WL. It is NOT a replacement housing: rear face fully open, original 129x50x23 mm controller remains inside. Internal cavity about 130x51x24 mm; outer size about 136x57x29 mm; walls 2-2.5 mm. Antique bronze/brown-gold, crisp resin-grade bas-relief on front, top, left, right and bottom. Front: clearly feminine classical profile with laurel hair, draped garment, compass rose in raised hand, partial gear, acanthus scrolls, fine texture, riveted frame. Keep all functional openings as true through-holes: 5 narrow top-front vents, rectangular service/fuse window, 3 lower front circular holes. Left side: ornate relief, rectangular Ethernet/service opening, narrow slot, round hole, rear-edge notch for 2 power wires. Right side: ornate relief, rear-edge notch for 3 GPIO wires. Top closed over terminals. No wires, electronics, fuse, display or device parts visible.