3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
rfutata7
02-20 15:39
Model Name
modular pet toilet base 3d model
Tags
3d printing
3d printing realistic
bathroom fixture
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a modular 3D printable hygienic pet toilet base inspired by a central drain tray system. Final assembled size: • 750mm width • 500mm depth • 45mm total height Modular layout: • 6 structural base modules • 3 modules wide × 2 modules deep • Each module 250mm x 250mm • Must fit within 256x256x256mm print volume Drainage system: • Single central drain at geometric center (375mm, 250mm) • Base interior must have gentle 3° slope toward center • Center area must be 12mm lower than outer inner edges • Smooth surface • No flat liquid-trapping areas CRITICAL: All modules must align to create one continuous shallow concave drainage surface when assembled. Drain outlet: • Located in central rear module • 25mm outer diameter hose connector • 40mm long • Barbed hose fitting • Slight downward orientation Waterproof joint system: • Male-female interlocking walls • 8mm insertion depth • 0.30mm clearance per side • Secondary internal drip barrier channel • No exposed vertical seams inside
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
rfutata7
rfutata7rfutata7