3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1771617792
03-18 04:05
Model Name
booster box display 3d model
Tags
3d printing
3d printing realistic
booster
box
furniture
furniture 3d printing
furniture 3d printing realistic
furniture realistic
pokemon
realistic
Prompt
Create a modular booster box display riser for a TCG card show table. Each module is a single solid wedge-shaped piece — flat on the bottom, low at the front (approximately 8mm tall) and taller at the rear (approximately 28mm tall) so that items lean back slightly when resting against it. The top surface is angled/sloped from front to back following the wedge profile. At the front, there is a small lip (approximately 6mm tall) to prevent items from sliding off. The module is designed to hold one Japanese Pokémon booster box, which measures approximately 145mm wide x 40mm deep x 145mm tall. The total module width is 153mm (145mm + 4mm side walls on each side). The side walls have a honeycomb cutout pattern to reduce weight and material. The underside is hollowed out for further material savings. Modules connect side by side via dovetail tab and slot interlocks on the left and right side walls, so multiple units can be snapped together on a table to display 10-20 boxes in a row. The piece should print flat on the bed with no supports required, and be suitable for a Bambu Lab P1S printer with a 256x256mm build plate. Design it as a clean single solid body with no floating or disconnected geometry.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1771617792
Anonymous1771617792