3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
mohammed samir
12-11 09:06
Model Name
retro television 3d model
Tags
props
game asset
stylized
Prompt
Create a precise 3D model of a compact Retro-style TV enclosure designed to perfectly fit a 7-inch Raspberry Pi-compatible touchscreen and a Raspberry Pi 3B+ board. ### FRONT DESIGN - The front opening must exactly fit a 7-inch display with a visible area of 165 mm width × 100 mm height. - Include a 3 mm front bezel surrounding the screen. - Outer front frame dimensions: 200 mm width × 140 mm height. - Add rounded vintage TV corners (radius 12 mm). - Add two decorative vintage knobs (15 mm diameter) on the right side of the frame. ### INTERNAL SCREEN MOUNT - The touchscreen must mount using the standard 4 corner holes of the display board: hole spacing 164 mm × 104 mm center-to-center. - Hole diameter: 3.2 mm. - Add internal support brackets (5 mm thick) that align with these mounting holes. - Include a 3 mm recess behind the front frame for the screen thickness. ### RASPBERRY PI 3B+ MOUNT - Create an internal shelf behind the screen to mount the Raspberry Pi 3B+ horizontally. - Raspberry Pi 3B+ board size: 85 mm × 56 mm × 17 mm height. - Mounting hole spacing: 58 mm × 49 mm (center-to-center), hole size 2.75 mm. - Include rear ventilation slots around the Pi. ### INTERNAL CABLE ROUTING (hidden) - Add two internal cable channels: one for HDMI and one for USB. - Channels length must support 10 cm micro-HDMI-to-HDMI and 10 cm USB cables. - Cable channels must be fully hidden inside the enclosure. - HDMI and USB must connect from the touchscreen to the Raspberry Pi without being visible from outside. ### POWER EXIT (only visible port) - Add one single rear power port opening (8 mm diameter) for the Raspberry Pi power input. - No other cables should exit the enclosure. ### BACK COVER - Add a removable back cover with four screws. - Cover size fits flush with the body. - Include small hidden ventilation grids on the top and bottom edges. ### OVERALL SIZE - Total approximate enclosure size: 210 mm width × 160 mm height × 120 mm depth. ### STYLE - Vintage mini-TV shape with soft curves. - Clean topology suitable for 3D printing. - Smooth surfaces, no unnecessary artifacts.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!