3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1765423354
12-11 03:47
Model Name
pipe fitting 3d model
Tags
machine
machine realistic
machine rendering
machine rendering realistic
pipe
pipe fitting
realistic
rendering
rendering realistic
Prompt
Create a precise 3D model of a threaded water pipe adapter with the following exact specifications: Overall Structure The model is a vertical cylindrical pipe with a mounting flange on top. The pipe must include a smooth bending section with a bend angle of 30–35 degrees. The bending must start after a straight vertical section and must be smooth, without sharp transitions. Flange (Top Plate) Outer diameter: 69.6 mm Thickness: 2.0 mm Inner opening aligned with the internal pipe diameter. Pipe Body Outer diameter: 56.5 mm Inner diameter: 48.4 mm Wall thickness automatically follows from the outer vs inner diameter. Thread (Inside the Pipe) Internal multi-start thread suitable for connecting a flexible hose. Same thread parameters as standard 48.4 mm hose connectors. Approximate thread depth: 1.6 mm Thread width: 2.5 mm Number of thread starts: 3-start thread Total number of turns inside the pipe: 6 full rotations Thread must follow the inner surface of the pipe including inside the bent section. Pipe Length Straight vertical section length before bend: Can be 70 mm OR 100 mm (choose whichever gives smoother bending geometry). Bending section length: 80 mm Bend angle: 30–35 degrees Bend direction: any consistent direction (does not matter left/right). Geometry Notes Bending must be smooth and circular, not kinked or sharply folded. The bend should follow a constant-radius arc. Internal thread must remain continuous along the curvature of the pipe. Position of bend start point: exactly after the straight section (70 mm or 100 mm). Bottom end of the pipe remains open. Output Requirements Output format: STL (preferred), or OBJ. Model must be watertight, manifold, error-free, ready for 3D printing. The model must preserve all internal and external dimensions as listed. All surfaces must be clean and non-self-intersecting. Generate the 3D model exactly according to these parameters."
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1765423354
Anonymous1765423354