3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
nyangorinyangori
12-08 12:09
Model Name
handheld device 3d model
Tags
handheld
handheld device
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
Prompt
Create a precise 3D-printable palm-side mount for the ME-US ME-X8 servo, same orientation as the reference image, placed on the LEFT palm. Orientation: Image-left = Thumb side, right = Little-finger side, top = Finger direction, bottom = Wrist. Servo front faces palm. Base Plate: 60×30×2 mm, rounded corners (R5). Velcro loops at both ends (20×2.5 mm opening, 1.5 mm walls). Two backside ribs (0.8 mm). Servo Pocket: Internal clearance 23.6×12.6×27.6 mm. Offset 15 mm toward thumb side. Shaft faces forward, horn toward thumb. Pocket has bottom + three full walls (thumb, little-finger, wrist). Finger side has only a 4–5 mm bottom lip; above it a wide open cutout for horn motion. Wall thickness ≈2 mm. Screw Holes: M2 holes on both thumb and little-finger sides. Holes run horizontally (thumb→little-finger). Ø2.2 mm, spacing 16 mm, recess Ø4×1 mm. Cable Slot: On wrist side, 6×3 mm opening outward. Requirements: Single manifold mesh, mm scale, FDM-friendly (<45° overhangs), min wall 2 mm, 0.5 mm fillets, clean CAD-like geometry.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
nyangorinyangori
nyangorinyangorinyangorinyangori